[Saws knowledge] Basic specifications and precautions for CNC sawing machine operation

The CNC sawing machine is a kind of sawing machine for cutting metal. It is a machine tool that cuts metal round materials, square materials, pipe materials and profiles by using circular saw blades, saw belts or saw blades as tools. Mainly composed of bottom seat, bed, column, saw beam and transmission mechanism, guiding device, workpiece clamping, tensioning device, feeding frame, hydraulic transmission system, electrical control system, lubrication and cooling system, etc. Very wide, of course, the operator also has a lot of precautions when doing CNC sawing operations.

Basic specifications for CNC sawing machine operation

1. The operator needs to do all kinds of inspections when carrying out the related work of the CNC band sawing machine. In particular, it is necessary to carry out all aspects of inspection without turning on the power supply, so as to ensure personal safety.

2. When carrying out the inspection of the CNC band sawing machine, it must be noted that the power supply is cut off, and the test pencil used must be used at a voltage below 500 volts, so that it is safe for the safety.

3. When debugging the CNC sawing machine, pay attention to all aspects of the problem, carry out relevant tests on the premise of ensuring the safety of personnel, find the fire in the process of use, cut off the power supply in time, and do not extinguish the water with water.

4. After the end of the work, it is necessary to dismantle various signboards, and at the same time, organize and classify various materials and utensils. This is the basic operation specification.

CNC sawing machine use precautions

1. When using the band saw, the operator should adjust the position of the handle according to the nameplate. Before adjusting the position of the handle and matching the hanging wheel, the power supply must be cut off to ensure the safety during use.

2. When cutting the thread, it is necessary to retract the knife and reverse the vehicle in time, otherwise it may cause the accident of the locomotive chuck and collision.

3. When performing the band saw operation, do not touch the thread surface by hand, which may cause scratches on the fingers.

4. Wear gloves when operating the CNC sawing machine. At the same time, the operator should not take the yarn end to check the thread during the operation, which may cause accidents.