Band sawing machine manufacturers talk about metal band sawing enterprise going global strategy

In the process of using a band saw, various problems are unavoidable. However, due to the unfamiliar knowledge of the band sawing machine, many companies cannot quickly and accurately determine the cause and solution of the band sawing problem, thus affecting the overall maintenance and production. schedule.

Here, when there is a problem with the band sawing machine, Jinan Zhengxiang Jiatai Machinery Co., Ltd. provides several simple and quick treatment methods for users who do not understand the maintenance of the sawing machine.

First of all, if there is a problem with the band saw, you can first choose the initial reset method. The initial reset method is usually used for system alarms caused by transient faults. In this case, you can choose to use hardware reset or power to switch the system to clear the fault. If the working area of the system is confusing due to power loss, plugging or unloading the circuit board or undervoltage of the battery, the system must be initialized and cleared. Before the cleaning, attention should be paid to the data copy record. If the fault cannot be eliminated after initialization, the hardware is performed. diagnosis.

After familiarizing yourself with the initialization reset method, perform the program correction method. Since the system parameters are the basis for determining the system function, if the parameter settings are wrong, it will cause system failure or malfunction.

Finally, an optimized adjustment method is applied to the band sawing machine. Adjustment is one of the easiest ways to do it. Through the adjustment of the potentiometer, the purpose of correcting the system failure is achieved.

If this simple treatment still does not solve the problem of band sawing, then consider looking for a professional to overhaul.

It is no surprise that the internationalization of domestic industries is now unprecedented. Many of the industry's leaders have participated in overseas mergers and acquisitions, not only introducing advanced technology, but also expanding China's influence. However, the metal band sawing industry is not so lucky, although the industry is also considered to be large, but there are only a handful of companies that are truly internationally competitive.

Speaking of the status quo of this industry, it is necessary to mention the metal go-saw enterprise's go-out strategy. For a long time, local production companies are only keen on the low-end market competition, and rarely take into account the international market. Even some leading enterprises have no special advantage in the international market. The high-end products in the domestic market are occupied by foreign brands all the year round.

Why domestic companies are frustrated repeatedly, and there are disadvantages in the international market. Huntsman has carried out effective analysis based on market data for many years. The problem lies mainly in talents:

Domestic enterprises lack high-level talents: domestic enterprises are usually the gathering place of ordinary workers in the industry. They lack professional technical knowledge, but are familiar with the assembly of products and other production processes. However, domestic enterprises have a short board with limited appreciation space in introducing advanced talents, and it is difficult to retain real high-end technicians.

Foreign trade talents are difficult to recruit: There are many professional terms in the machinery industry, and there are not many people engaged in mechanical foreign trade. It is difficult for small and medium-sized cities to recruit talents in this area, which makes many companies' overseas steps difficult.

The above analysis shows that China's metal band sawing enterprises do face many difficulties in going out. The industry companies can only face these difficulties and break through one by one in order to have a place in the world market.